Argon plant 80 Nm3/h ~ 200 Nm3/h LAr KDONAr-3600/4500/80Y Balance Gas Coal chemical industry
80 Nm3/h ~ 200 Nm3/h LAr Argon Plant KDONAr Series
2 ppmO2,3 ppmN2
1ppmO2/2 ppmO2,3 ppmN2
2 ppmO2,2 ppmN2
Typical Product: KDONAr-3600/4500/80Y Argon plant
Output, purity and pressure
3600 Nm3/h /4500 Nm3/h/80 Nm3/h
99.6% O2 /10ppmO2/ 2ppmO2,3ppmN2
Based on the observation of air and waste nitrogen flow path, we
confirm the various pressures of the main flow paths in the air
separation plant. Therefore pressures for other flow paths can be
The outlet pressure of expander is corresponding to the pressure of
middle part of upper column, and the inlet pressure of boosting end
of expander is corresponding to the pressure of air after purified.
As long as the efficiency value, expansion capacity and booting
capacity of expander are ascertained, the pressure values of the
boosting expansion flow path can be ascertained as well.
The feed gas for argon producing system comes from the middle and
lower part of upper column, and the working pressure of crude argon
column can be ascertained. And then ascertain the working pressure
of pure argon column according to the liquid level difference.
- N2 Converter Rental
- Balance Gas
- Fertilizer Industry
- Coal chemical industry
- Welding and metal processing
- Illumination industry
- Widely sales around the world: we supplied many countries (Germany,
USA, Iran, Indonesia, North Korea, Mexico, Kazakhstan, Saudi
Arabia, Spain, Egypt, Brazil, Vietnam, Hungary, Malaysia, Russia,
Czech, Switzerland, Myanmar, Thailand, Mongolia, Syria, India,
- This air separation plant’s process is mature and easy to operate.
In particular, the operation becomes easier because argon is
produced through complete rectification in fractionating column.
Such main equipments as cryogenic cold box are low pressure
equipments which are more reliable and easy to maintain and repair.
The parts needing to be maintained and repaired are considered in
design to be maintainable such that the dismantlement and
installation are easy, and the cryogenic parts can be repaired at